Product Center
Committed to stepper motors and drivers control production research and development



Tel: +86-519-88381518 

Mobile: +86 18068528818


Add: Hugang Bridge, Economic Development Zone,Changzhou, Jiangsu,China


Number of views:

CW2283 stepper motor driver

Retail price
Market price
Number of views:
Product serial number
Product description

1、 Introduction

1. Descriptions

CW2283 is subdivided and high-performance stepper motor drive using constant angle and constant torque,which is designed for 130BYG、110BYG and other 8A following two-phase, four-phase hybrid stepping motor. The driver uses the circuit which is Similar to the principle of servo control with the features of smooth running, low noise, low vibration, low temperature rise of the motor .It has 16 kinds of micro-step, and the micro-step can be set from full step to 51200steps/rev.The working current can be set from  2.0A to 8.3A, and the output current has 16 stalls, the current resolution is about 0.5A; with automatic semi-flow, self-test, overvoltage, under-voltage and over-current protection. This driver is AC power, Voltage does not exceed 240VAC not less than 120VAC.

2. Features

• high performance, low price

• micro-step

• Automatic idle-current reduction

• Optical isolating signal I/O

•Max response frequency up to 70Kpps

• Low temperature rise, smooth motion

• Online adaptive PID technology


It is suitable for a variety of small-scale automation equipments and instruments, such as labeling machine, cutting machine, packaging machine, plotter, engraving machine, CNC machine tools and so on. It always performs well when applied for equipment which requires for low-vibration, low-noise, high-precision and high-velocity.

4.Electrical Specifications

二、 Parameter setting

1. Current setting

Dial switch: on=0; OFF=1

2. Standstill Current Setting

Half current is default 

3 Micro-step setting

Dial switch: on=0; OFF=1

三、Connectors and Pin Assignment

1. Control signal Connector

2. Power and Motor Connector

3. Control Signal Connector Interface

四、Problems and Solutions

五、Mechanical Specifications (unit: mm(inch),1 inch = 25.4mm)

The overall dimension of the driver is:195×108×84mm, see the overall dimension drawing for details. Pay attention to leave more than 10cm space for heat dissipation. During installation, it should be close to the metal cabinet to facilitate heat dissipation.





Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table

Related Products


Username used for comment:


Mobile:+86 18068528818 (Elaine Yang)

Add:Hugang Bridge, Economic Development Zone,Changzhou, Jiangsu,China


Follow Us

Changzhou Chuangwei Motor & Electric Apparatus Co., Ltd    Powered by: Changzhou       苏ICP备2021012447号-1