Prodcuts
Contact
Tel: +86-519-88381518
Tel: +86-519-88389757
Mobile: +86 18068528818
E-mail: cw@cwmotor.cn
Add: Hugang Bridge, Economic Development Zone,Changzhou, Jiangsu,China
CW215 stepper motor driver
1、 Product introduction
1.Descriptions
The CW215 driver is a cost-effective and high performance stepping driver. The design is based on an advanced control technology. It applies to two-phase or four-phase hybrid stepping motor below 1.5A,such as 42BYG,39BYG. Due to the adoption of the advanced bipolar constant-current chopper driver technology. It shows many features such as stable operation and excellent high speed torque. It has 7 kinds of micro-step, and the maximum number of micro-step is 1/64. Chopping frequency of 20000 times per second can eliminate the noise of the motor. Another unique function is that it can automatically reduce current: when the motor is stopped, the output current reduces to a lower value, thereby reducing the heating of the motor and driver.
Supply voltage range from 18VDC to 40VDC ,the output current can be set from 0.2A to 1.5A; with automatic idle-current reduction, self-test, over-voltage, under-voltage and over-current protection.
2. Features
• high performance, low price
• micro-step
• Automatic idle-current reduction
• Optical isolating signal I/O
•Max response frequency up to 70Kpps
• Low temperature rise, smooth motion
• Online adaptive PID technology
3.Applications
It is suitable for a variety of small-scale automation equipments and instruments, such as labeling machine, cutting machine, packaging machine, plotter, engraving machine, CNC machine tools and so on. It always performs well when applied for equipment which requires for low-vibration, low-noise, high-precision and high-velocity.
4. Electrical parameters
二、 Parameter setting
1. Current setting
Dial switch: on=0; OFF=1
2. Micro-step setting
Dial switch: on=0; OFF=1
三、Connectors and Pin Assignment
1. Control signal Connector
If the input signal voltage amplitude is greater than 5V, the input terminal needs to be connected in series with a current limiting resistor (refer to the control signal interface circuit diagram).
2. Power and Motor Connector
3. Control Signal Connector Interface
四、Problems and Solutions
五、 Mechanical Specifications (unit: mm(inch),1 inch = 25.4mm)
Feedback
Contact
Mobile:+86 18068528818 (Elaine Yang)
Add:Hugang Bridge, Economic Development Zone,Changzhou, Jiangsu,China
Follow Us
Changzhou Chuangwei Motor & Electric Apparatus Co., Ltd Powered by: www.300.cn Changzhou 苏ICP备2021012447号-1